Model No.: Ballasted Solar Mount Bracket(MD0261)
|Ground solar mounting|
|Installation site:||Open field ground|
|Survival Wind Speed:||< 60m/s|
|Design Snow load:||Up to 1.4KN/ Square meters|
|Solar panel type:||Framed or Frameless|
|Panel Orientation:||Transverse or vertical|
|Quality warranty:||12-25 years|
|Duration:||More than 20 years|
|Delivery time:||7-15 days|
Applications of solar mounting:
1) Living house and home building.
2) Commercial building, factory, shopping mall, school, stadium etc.
3) Power station, field operation and some huge engineer construction.
AS 1170.0-2002 Structural Design Action Part 0: General Principle.
AS 1170.0-2002 Structural Design Action Part 2: Wind Action.
AS 3566.1-2002 Self-drilling screws for the building and construction.
AS 3566.2-2002 Part 2:Corrosion resistance requirements.
AS 4600-2005 Cold formed Steel Structures.
ISO 3506:1-2009 Mechanical Properties of Corrosion-Resistance Stainless Steel Fastener.
Eurocode-Basis of structural design.
Eurocode 1-Actions on structrues-Part 1-2:General actions-Snow loads.
Eurocode 1:Actions on structures-Part 1-2:General actions-Wind actions.
ModRaxx is backed standard by a 12 year guarantee. This can also be extended up to 25 years for large scale and commercial projects.
ModRaxx has all the standard roof types covered and is always working to design new fixings to cater for all customers.
Various tile Brackets
Standing Seam Brackets
1. Enables easy,fast and cost-effective installation.
2. Flexible post spacing withstands different wind&snow loads.
3. High quality material in Aluminum 6005-T5 and SUS 304.
4. Highly corrosion resistant surface treatment.
5. Screws and nuts go with every componts needed.
6. Fasteners and rail nut fully configured to save extra parts purchasing.
7. Mechanical calculation and reliability tested to ensure highset product quality.
8. 12-25 years system and structural guarantee.
|standard pan tile||stainless steel,303||105-0000|
|mid clamp earth washer||stainless steel,303||106-0001|
|earth lug earth washer||stainless steel,303||106-0002|
|universal mid clamp||T5-5999series anodised aluminium,ss fixings||300-0001||31mm to 50mm|
|universal mid clamp with earthing||T5-5999series anodised aluminium,ss fixings||300-0002||31mm to 50mm|
|universal end clamp||T5-5999series anodised aluminium,ss fixings||302-0001||50mm|
|rail joiner||T5-5999series anodised aluminium,ss fixings||303-0001||100mm|
|L-Bracket 6.3mm with rubber||T5-5999series anodised aluminium||304-0001||40mm|
|L-Bracket M8mm hole||T5-5999series anodised aluminium||304-0002||40mm|
|earthing lug 4-6mm core||T5-5999series anodised aluminium,ss fixings||305-0000||4mm and 6mm|
|T-head rail connector with nut||stainless steel,303||17mm|
|klip-lok 700 bracket||T5-5999series anodised aluminium,ss fixings||314-0000||80mm|
|klip-lok 600 bracket||T5-5999series anodised aluminium,ss fixings||314-0001||80mm|
|klip-lok 406 bracket||T5-5999series anodised aluminium,ss fixings||314-0002||80mm|
|folded tripod tilt||T5-5999series anodised aluminium,ss fixings||317-0000||1200mm/10 to 30 degree|
|cross rail bracket assembly||T5-5999series anodised aluminium,ss fixings||318-0000||1200mm/30 to 60 degree|
|hanger bolt-L bracket- wood||T5-5999series anodised aluminium,ss fixings||320-0000||200mm M10|
|hanger bolt-L bracket- steel||T5-5999series anodised aluminium,ss fixings||320-0001||200mm M10|
|roofing screw||Carbon steel,decromat coating with EPDM seal||100-0002||Type 17 Point - 6.3mm x 75mm|
|steel tube front leg||Galvanised steel||307-0000||700mm x 60mm|
|steel tube rear leg||Galvanised steel||310-0001||1200mm x 60mm|
|steel tube cross section pipe||Galvanised steel||310-0002||2500 mm/3500 mm/2700 mm/3700 mm|
|aluminium slot rail||T5-5999series anodised aluminium||308-0000||4000mm|
|Clamped Rail Piece||T5-5999series anodised aluminium||308-0001||4200mm|
|T-pipe connector piece||Galvanised steel,ss303 fixings||309-0000||7 M10 Hex Nuts|
|riail to cross pipe connector||T5-5999series anodised aluminium||310-0000|
|bottom cap piece||Galvanised steel,ss303 fixings||311-0000||3 x M12 Hex screws|
|diagonal braces sleeve||Galvanised steel,ss304 fixings||312-0000||M10 nuts and bolts|
|brace arm piece||Galvanised steel||313-0000||40mm x 40mm|
Company Informations Of MODRAXX:
Our group has more than 30 years experience in manufacturing Aluminum and steel components and works strictly under
ISO 9001 manufacturing standards with Quality always at the forefront of ModRaxx's manufacturing program. ModdRaxx will
always work with our customers and our team to get the best quality products on time every time
ModRaxx has a team of
engineers ready to not only assist our customer but also their customers with any solar mounting solution design whether it be a
small roof or large scale utility solar farm. We have years of experience in layout design, dealing with different soil and
wind conditions, and rooftop design
Understanding that the most important part of solar pv solar installations is 'time', all of ourproducts are carefully designed with
fast installation always in mind. Time is money and with years of experience in dealing with solar installers ModRaxx understands
just how important it is to have a safe and reliable system that can be installed quickly and efficiently
Contact us if you need more details on Ballasted Solar Mount Bracket. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Solar Panel System、Solar Mounting System. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Solar Mounting System
Premium Related Products